EKOTHERM

Professional anti-condensation white matte water-based paint, loaded with hollow glass microspheres to counteract the formation of condensation on walls and thus the onset of mold and bacteria, particularly on cold walls. Permeable to water vapor, it allows walls to breathe, with gradual coverage in 30-60 minutes. One liter of product covers 4 sqm per coat.

€49,45 €4,95/m²

Taxes included. Shipping calculated at checkout.

PRACTICAL TIPS

Tools required: brush, roller, spatula for mixing the product, clean water.

Preparation:. Ensure that the wall is clean, free of mold, dirt, or loose parts. If you have spackled, make sure it is completely dry. Dilute the product with water, as follows:

PRODUCT	WATER
5 LITERS	0.75 LITERS
10 LITERS	1.5 LITERS

Application method: add water as indicated above and mix, load the roller or brush, and apply to the wall by criss-crossing the strokes to obtain a uniform finish. After 4 hours (at at least 20°C), apply an additional coat if necessary.

Environmental conditions: temperatures between 5°C and 35°C, relative humidity <80%.

Technical information: coverage will not be instantaneous to allow the product to consolidate and penetrate the wall properly; the color will develop gradually over 30-60 minutes.

The indicated yield refers to the product applied in two coats on uniform, standard laboratory surfaces. Consumption figures are not contestable as substrate conditions and application method can significantly vary absorption and thickness.

Expert's tip: Remove cover plates from sockets and switches, spackle and smooth where necessary, apply masking tape to all areas to be protected, cover furniture and any delicate parts, trim all corners and edges with a brush or appropriate roller, then apply the product to the entire surface.