MURCLAD + MEGATON

Water-based paint with washability class 3, active protection control, water-repellent and alkali-resistant, breathable and water vapor permeable for interiors and exteriors, with excellent coverage and fullness. Bioactive against the growth of mold and bacteria.

€33,25

Taxes included. Shipping calculated at checkout.

PRACTICAL TIPS

Tools needed: brush, roller, product mixing spatula, clean water.

Preparation:. Make sure the wall is clean, free of mold, dirt, or loose parts. If it has been plastered, make sure it is completely dry. Dilute the product with water, as follows:

PRODUCT	WATER
1 LITER	0.300 LITERS
2.5 LITERS	0.750 LITERS
5 LITERS	1.5 LITERS
14 LITERS	4.2 LITERS

Application method: add water as previously indicated and mix, load the roller or brush and apply to the wall in a crosshatch pattern to obtain a homogeneous finish. After 4 hours (at at least 20°C), apply an additional coat if necessary.

Environmental conditions: temperatures between 5°C and 35°C, relative humidity <80%.

Technical information: the coverage will not be instantaneous to allow the product to consolidate and penetrate the wall well; the color will develop gradually within 30-60 minutes. The indicated yield refers to the product applied in two coats on uniform, standard laboratory surfaces. Consumption rates are not disputable as substrate conditions and application methods can significantly vary absorption and thickness.

Expert advice: Remove switch and outlet plates, fill and smooth where necessary, apply masking tape to all areas to be protected, cover furniture and all delicate items, trim all corners and edges with a brush or appropriate roller, then apply the product to the entire surface.